Automatic with descaling program

With descaling programs, always follow the manual of your coffee machine manufacturer.
For devices with a water reservoir of more than 1 liter, we recommend using 250 ml descaler.
Europ

1. Pour tap water in the water reservoir until the amount recommended by the manufacturer has been reached.
2. Pour 125 ml descaler into the water reservoir.
3. The program now starts automatically or can be started.
4. Then catch the liquid in a sufficiently large glass cup.
5. Note: the liquid can be hot!
6. Allow the solution used first to cool before rinsing it.
7. Rinse with a lot of water.
8. Rinse the water reservoir with clean water.
9. Then flush the machine with 1 to 2 fuel fillings.
10. Tip : remove the coffee machine with a damp cloth after descending to remove any splashes from the descaler.
    Europ

‍

Machine without a descaling program
‍

1. Pour 125 ml descaler into the water reservoir.
2. Fill the reservoir with the same amount of tap water (125 ml).
3. Let this solution run through the hot water exhaust. (Steam function from!)
4. If the device does not have a hot water outlet, let the solution run through the coffee outlet.
5. Then catch the liquid in a sufficiently large glass cup.
6. Note: the liquid can be hot! Allow the solution used first to cool before rinsing it.
7. Rinse with a lot of water.
8. Rinse the water reservoir with clean water.
9. Then flush the machine with 1 to 2 fuel fillings.
10. Tip : decrease the coffee machine after descending with a damp cloth to remove any from the O.

‍Now you can enjoy your perfect cup of coffee again.

‍‍

‍

Important comments

The descaler contains sulfamic acid and citric acid. Prevent acid -sensitive materials from coming into contact with the solution.
These can be affected. When contact with the eyes, it immediately rinse with water.
Consult a doctor in the event of persistent irritation.

‍