Step 1. Shake the filter for about 5 seconds.
Step 2. Dip the filter upside down in a container with cold water, shake/press a little in the filter and watch until no air bubbles come out.
Step 3. The filter is now prepared for use and can be placed in the water reservoir.
Step 4. Place the filter vertically on the filter base in the water reservoir. Press the filter all the way.
Step 5. Fill the water reservoir with fresh water and place it back in the device.
Step 6. Remove the Lattego if it is confirmed.
Step 7. Place a bowl under the hot water outlay/milk frother.
Step 8. Hold down the AquaClean icon for 3 seconds. The starting light starts to pulsate.
Step 9. Press the Start/Stop button to start the activation process.
Step 10. Hot water is released from the hot water outlay/milk frother (up to 3 minutes).
Step 11. When the activation process is completed, the blue AquaClean light will burn to reign that it
AquaClean water filter is correctly activated.